Gutter Repair

Common Gutter Repairs in Central Ohio

Loose hangers, leaking corners, lost slope, and detached downspouts — the repairs we see weekly, what causes each, and what a real fix looks like.

Pulling away from the house

The most frequent call. Older gutters were hung with spikes driven through the gutter into the fascia; decades of freeze-thaw and debris weight work them loose, and the gutter tilts forward. The proper fix is hidden hangers screwed into solid wood on a tight spacing — not tapping the old spikes back in, which lasts one season. If the wood behind the spikes has gone soft, that gets addressed first.

Leaking corners and end caps

Corners (miters) and end caps are sealed joints, and sealant is the mortal component of any gutter system — Ohio's freeze-thaw cycles crack it open over the years. A proper repair means cleaning the joint down to bare metal and resealing with quality gutter sealant, or replacing the miter itself if the metal is compromised. A bead of caulk smeared over dirt fails by the next winter.

Lost slope and dead water

Gutters need a consistent fall toward the downspout. When hangers loosen unevenly, runs develop bellies where water stands after every rain — and standing water accelerates corrosion, breeds mosquitoes, and turns to ice sheets in winter. Re-pitching means resetting the hanger line so the run drains completely. While we're up there, we flush downspouts and check every outlet, because a repair visit should leave the whole run working, not just the symptom you called about.

The next step is a measurement, not a guess

Free on-site estimate — Antonio measures the roof, explains what the water is doing, and puts the number in writing.

Book the Free Measure

Ready for a gutter system sized to your roof?

Free on-site measure, a written quote, and a start date on paper. The number on your signed quote is the number on your invoice.

(380) 268-0741